t1 clock source

t1 channel clock source { line | internal { module | chassis } }

no t1 channel clock source

Command introduced before JunosE Release 7.1.0.

Determines which end of the T1 interface provides clocking. The no version uses the default value, line.

channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
line—Interface transmits data from a clock recovered from the line’s receive data stream
internal—Interface transmits data using its internal clock. You must specify one of the following for internal clocking:
- module—Internal clock is from the line module itself
- chassis—Internal clock is from the configured system clock

Controller Configuration